Now more and more places will install cameras, because the cameras can record what happens under the monitoring range. When installing a wireless camera, first select a suitable location and fix the location, and then connect to the computer device and select the corresponding IP address You can also install the camera directly on the mobile phone and see the camera picture through the mobile phone. When installing a wireless camera, you need to debug it first and then install it. Consider whether it is a function or not, and choose a suitable wiring method. The following is a detailed introduction to you.
1. Installation method of wireless camera
1. Usually such a wireless camera monitoring system is a complete set of equipment, and the camera can be used alone. In the past, it was necessary to install infrared devices and other devices. Now the wireless camera has been perfected and improved. It is no longer necessary other configuration.
2. After installing the camera in a good viewing angle position, you need to connect it to the computer system. At this time, you need to turn on the computer and install the driver system of the camera. If the wireless camera you purchased is driver-free, then Skip this step.
3. When you see the IP address and related ports monitored by the wireless camera on the computer, you need to set it up by yourself at this time, and follow the instructions in the computer to complete it step by step, so that the router or other devices can obtain the camera when monitoring. data.
4. You can install the wireless camera APP in your mobile phone or other communication tools, so that even if you are in the field, you can still monitor everything at home. However, it is recommended that when installing this type of monitoring system, it must be in the state of WIFI, because the use of traffic is still relatively large.
Second, the wireless camera installation precautions
1. Don't rush to the on-site installation after getting the monitor, first debug it in the computer room and then install it, and check that the accessories of the equipment are complete. The installation of the wireless monitoring system first decides whether to install a monitoring card on the existing computer or an embedded hard disk video recorder as your monitoring host. Using a computer to install a monitoring card requires a relatively low overall investment, and is suitable for places that are familiar with computer installation, have professionals on duty, and have many functional requirements. The computer needs to be turned on 24 hours a day; the use of the embedded hard disk video recorder does not require professional knowledge, does not need to be on duty, and the operation is very simple.
2. When installing monitoring equipment, it is necessary to determine how many cameras to install, and to determine the monitoring range and image quality of each camera. First decide the number of cameras for monitoring, and then determine the scope of the camera's lens monitoring according to the specific situation: the distance from the camera to the monitoring point and the area to be monitored should be clear.
3. Whether to have night vision function. If your monitoring equipment is installed in dark places such as corridors, hallways, aisles, warehouses, etc., you can consider cameras with infrared night vision functions. It should be noted that infrared cameras are in addition to professional night vision. In addition to special orders, the infrared camera also needs to have lights on the scene to assist the five fingers, and the infrared distance will be shortened exponentially. If the scene is a garden lawn, the infrared effect is even worse.
4. Is it direct wiring or wireless transmission to install. In addition to the expensive price, the wireless network does save the trouble and unsightly installation of the camera, but it needs to pay attention to the problem of distance and obstacles. In principle, cement building materials will shorten the wireless transmission distance, and metal materials will completely block the wireless signal. The transmitter (on the camera side) and the receiver (on the host side) should be far away from other electrical appliances to avoid interference. It is necessary to have monitoring equipment that can afford more than 2 times the price. We recommend using wired transmission for installation unless necessary.
5. On-site monitoring and network monitoring When determining the installation of the monitoring system, you should consider whether network functions are required. That is to say, if you need to monitor and control the monitoring site at any time on the Internet, you need to choose a monitoring host with network functions. Avoid the installation is complete but there is no network transfer function.
