What are the steps to install the camera? Everyone can install the camera. Before installing the camera, the tools to be prepared include screwdrivers, impact drills, screw plugs, power sockets, memory cards, routers, client software, etc. When buying cameras, pay attention to high-quality products. Such as focus on high sensitivity, anti-glare, small distortion, small size, long life, anti-vibration and other advantages.
1. Select the location for installing the camera, check the size and model of the plug and self-tapping screws according to the determined installation location, test whether the bracket screws and the screw holes of the camera base are suitable, and whether the pre-buried pipeline interface is handled well. Test if the cable is unobstructed and enter the installer when ready. Under the condition that it meets the requirements of the field of view of the surveillance target, the installation height should not be lower than 2.5m indoors and 3.5m outdoors.
2. For the installation of the surveillance camera, carefully install the lens according to the pre-determined model and specifications of the camera lens (the infrared integrated camera does not need to install the lens). Be careful not to touch the lens sensor with your hands. After confirming that it is firmly fixed, turn on the power and connect the Use a monitor, small TV, etc. on the host or on-site to adjust the aperture and focal length.
3. Fix the surveillance camera, take out the brackets, plugs, screws, screwdrivers, small hammers, electric drills and other tools, and install the brackets according to the pre-determined positions. After checking for firmness, install the camera in the agreed direction.
◆Installation of the camera cover, if you need to install the cover, after the second step, install the cover directly from here. Open the upper cover and rear cover of the shield;
◆Pull out the fixing metal sheet and fix the camera;
◆Put the power adapter into the shield;
◆Reset the upper cover and rear baffle, straighten out the cables, fix them, and install them on the bracket.
4. Install the camera BNC head or aviation head, and insert the welded BNC plug of the video cable into the socket of the video cable to confirm that it is firmly fixed. Surveillance cameras and their supporting devices, such as lenses, protective covers, brackets, wipers, etc., should be firmly installed, flexible in operation, and should be protected from damage and coordinated with the surrounding environment.
5. Connect the power supply, insert the power output plug of the power adapter into the power socket of the surveillance camera, and confirm the firmness. In a strong electromagnetic interference environment, the installation of the surveillance camera should be isolated from the ground.
6. Connect the video host, connect the other end of the cable to the control host or monitor (television), and make sure it is firm.
7. Adjust the camera to the best position, connect the monitoring host and the camera power, and adjust the camera angle to the predetermined range through the monitor. In addition, the installation of all control, display, recording and other terminal equipment of the surveillance camera should be stable and easy to operate. Among them, the monitor (screen) should avoid direct external light, and when it is unavoidable, measures should be taken to avoid light. Equipment installed in consoles and cabinets (racks) should have ventilation and heat dissipation measures, and the connection between internal connectors and equipment should be firm.
The above camera installation experience and steps are limited to the installation of household and some small monitoring systems.
